Other interesting iron | Product Categories | Cast Iron Guys

Item 1082

This is a old tool for making cast iron cookware and other ironware. This was meant to be used to pack the sand around the form to get a nice tight fit so that when the form was removed you’d be left with a sand mold into which to pour the molten iron. I believe the wood is maple but I am certainly not an expert in wood identification.

Unrestored. Sold as found.

$50 shipped

As always we are happy to combine shipping, as well as take back pieces if you are not satisfied. (Please see return policy)

Old iron makers tamping tool for packing sand for iron molding. Shipping Included

$50.00

Add to cart

Item 1733

Sold as found.

Old document stob (spike for receipts or paper) that probably sat on the desk of a clerk in someone’s professional office and probably was from the early part of the last century. Would look great on someone’s desk. Base is iron with plating. Spike is steel. Should polish up great.

Unmarked

stands roughly 8” tall. Base is roughly 3” side to side.

Sold as found.

$25 shipped ($7 shipping rebate will be given if purchased with a larger piece that includes shipping)

Ornate Iron stob document/reciept spike with hexagonal base. Brass plated.

$25.00

Add to cart

Item 1734

Sold as found.

Old document stob (spike for receipts or paper) that probably sat on the desk of a clerk in someone’s professional office and probably was from the early part of the last century. Would look great on someone’s desk. Base is iron with black enamel. Spike is steel. Nice detail work.

Unmarked

stands roughly 6” tall. Base is roughly 2” 1/2 side to side.

Sold as found.

$25 shipped ($7 shipping rebate will be given if purchased with a larger piece that includes shipping)

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Ornate Iron stob document/reciept spike with octagonal base withscrew holes for fastening to desk

$25.00

Add to cart

Item 2183

Please note all pictures on our site are of the actual piece you will receive, not a stock photo of a similar piece. Additionally all our pieces unless marked otherwise are fully restored and seasoned. Just wash them and start cooking.

SOLD AS FOUND.

This is a pair of wrought iron cooking forks made by a blacksmith. I’d say they are probably at least 75-100 years old. There are no markings. The smaller one is about 15” 12 long and has two tines with a max diameter of 1” 1/2. The larger is is about 18” 1/2 long and has three tines with a max diameter of 2” 1/2

Sold as found.

No cracks or chips.

$75 shipped.

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Pair of blacksmith made wrought iron cooking forks c. 1900-1925

$75.00

Add to cart

Item 2350
Please note all pictures on our site are of the actual piece you will receive, not a stock photo of a similar piece. Additionally all our pieces unless marked otherwise are fully restored and seasoned.

SOLD AS FOUND. Painted.

Do not know who made this but it’s a very pretty display piece with traditional folk art painting on an old sad iron. Nice pie shaped body.

Unmarked.

7” x 2.5” excluding handles.

Sold as found.

No cracks, chips.

$40 shipped

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Pennsylvania dutch folk art painted sad iron – very pretty display piece.

$40.00

Add to cart

Item 2075

Please note all pictures on our site are of the actual piece you will receive, not a stock photo of a similar piece. Additionally all our pieces unless marked otherwise are fully restored and seasoned. Just wash them and start cooking.

I can’t tell you if this one is iron or steel, but based on the finish I lean towards it being steel. Still it’s darn cute. Anyhow it’s a nice piece that will be great in someone’s kitchen.

Cleaned via lye method and cured with non-GMO canola oil (2 coats).

$30 including shipping (Get a $5 shipping rebate with any piece size 5 or larger that includes shipping).

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Pig Trivet by Marble design from 1982 Iron or steel

$30.00

Add to cart

1736-portland-stove-foundry-2-8-x10-fully-marked-ash-clean-out-door-and-frame1

Item 1737

Sold as found.

Fully marked cast iron door made by Portland Stove Foundry Co. Cool piece for the collector and still quite usable. Sold for less than you’d buy a modern one for, but with a much higher cool factor. Sold as found with some mortar still in the frame. Not sure if the green color is a factory original or if was painted later. Drop hinged so that the door swings down.

Marked: “Portland Stove Fdy. Co Portland ME. No 2 8 x 10”

12” x 10” with frame.

Sold as found.

Cool as it is or it could easily be restored (or we can do it for you for an additional fee)

$85 shipped

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Portland Stove Foundry #2 (8” x10”) fully marked ash clean out door and frame

$85.00

Add to cart

Item 1219
Sold as found.

Interesting mold that appears to be chocolate, donuts or candy rings. Appears to be cast aluminum with a iron hinge pin, but it could be tin. Fairly heavy for the size. 3” 5/8 diameter. Roughly 1” tall. Hinged. Not magnetic except at the pin. Seems to be in excellent shape. Looks like it could just be washed and used
Marked: with a number which is unreadable. Three digits – maybe a 308 or something like that.

No cracks or chips.

$27.99 shipped.

As always we are happy to combine shipping, as well as take back pieces if you are not satisfied. (Please see return policy)

Ring Mold for donuts or candy making. Shipping Included.

$27.99

Add to cart

Item 2065

Please note all pictures on our site are of the actual piece you will receive, not a stock photo of a similar piece. Additionally all our pieces unless marked otherwise are fully restored and seasoned. Just wash them and start cooking.

SOLD AS FOUND
This is a small wrought iron blacksmith made trivet/hot plate/grill with 1” 1/4 inch legs. that is probably high enough that you could throw a few coals beneath a piece and use it to cook – BUT I suspect it was really meant to be a hot plate/cooling rack for smaller pieces that just came off the hearth.

Measures 5” 1/2 x 5” 5/8. legs are approximately 1” 1/4 inches tall.

Sold as found

$32.99 shipped.

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Small Blacksmith made grill trivet. Wrought iron.

$32.99

Add to cart

Item 1898

Please note all pictures on our site are of the actual piece you will receive, not a stock photo of a similar piece. Additionally all our pieces unless marked otherwise are fully restored and seasoned. Just wash them and start cooking.

Cleaned and painted with high heat spray enamel

Fireback made in the 1985 by the Country Iron Forge who based the pattern on a French piece from the 1800s. Cleaned and painted with high heat spray enamel. New these go for over $400 PLUS shipping.

Marked: Country Iron Forge

19” x 19”. Weighs about 40lbs

Cleaned and painted with high heat enamel.

$200 shipped to the lower 48. Shipping elsewhere will be additional.

As always we are happy to take back pieces if you are not 100% satisfied. (Please see return policy)

Small crown fireback with fleur de lys pattern made by Country Iron Forge

$200.00

Add to cart